V-One
Product Information
VOLTERA V-One PCB PRINTER is desktop size. However, it is capable of printing traces on printed circuit boards (PCB) such as FR4 and FR1, flexible boards such as PET and PEN, metal boards, glass boards and paper boards with conductive ink. In addition, it also can drill through holes and vias, precisely dispense solder paste and reflow components with a built-in heater. It is an all-in-one solution for board fabrication that keeps your development cycle in-house.
Features
Zero Lead Time
Getting a few boards should not mean waiting for the factory on the other side of the world. Just load your files, click print, and have your board in less than an hour. No lead time, no stencils, no hassle.
Less Costly Mistakes
We have all been there… waiting for weeks for boards to arrive only to find out there was a mistake in the layout. With the V-One, you can print a corrected board immediately.
Surprisingly, Usable Software
The free-to-use Voltera software accepts Gerbers from any CAD tool, performs regular updates automatically, and comes with video tutorials to guide you through each workflow.
Application
Board For Prototype
V-One can print traces on rigid printed circuit boards such as FR1 and FR4, polyimide and rigid flexible boards.
PRINTED ELECTRONICS FOR PROTOTYPE
V-One applies to the production of prototypes for printed electronics by combining flexible substrates such as PET, PEN, paper, and Kapton with conductive inks such as silver nano ink, carbon ink, and graphene ink, dielectric pastes, and conductive adhesives.
Product Overview
V-One is a 3-axis movable device that is almost the same size as a notebook PC and can be placed on a desk. It is also equipped with a heater plate used to cure conductive ink and reflow solder paste.Please refer to the following overview.
IN THE BOX
- V-ONE PRINTER
- Conductive 2 Ink Cartridge
- Solder Paste Cartridge
- dispensers with caps x2
- probe, substrate clamps x2
- disposable 230micron nozzles x25
- thumbscrews x4
- 2”x3” FR4 x10
- 3”x4” FR4 x6
- Hello World starter kit
Specifications
| Dimensions/Weight | L257×W390×H207（mm）/7kg |
| Print bed | Max. Heated Bed Temperature 240℃ |
| Power | 100～120VAC 4.7A（50/60Hz）575W |
| Software Requirements | Windows 7, 8, 10 (64bit), OSX 10.11+, Wired USB |
| Compatible File format | Gerber |
| Print Area | 128×116mm |
| Printing | Minimum Trace Width 0.2, Minimum Pin-To-Pin Pitch 0.65㎜, Φ0.5㎜,Minimum Passive Size 1005 |
| Resolution | FR1/FR4/PI/PET, etc |
| Applied Board | Applied Board |
| Resistivity | 12mΩ/Sq @ 70um Height |
| Soldering | 0.5mm (minimum pin to pin pitch) |
| Soldering Iron Temperature | Solder Paste Alloy : Sn42/Bi57.6/Ag0.4 Solder Wire Alloy：SnBiAg1 Soldering Iron Temperature：180-210℃ |
Accessories And Consumables
We are also selling accessories and consumables. By purchasing those, you can improve the quality of board fabrication. Drill, Inks, Solder, Substrates and Nozzles, etc.
You can contact us for any further questions.